• 0
  • 0

X-SWPU340 low-bed swap-body platform

Auwärter Wechselpritsche X-SWPU370

X stakes

for optimum load securing of wall elements


2x1 load securing rings

in the outer frame provide maximum load safety even with wide transports.


Stable telescopic support legs

for individual, flexible parking heights, pull out to the side, lockable, hot-dip galvanized


Low-bed construction

for maximum load height

Key facts

Convincing advantages.

  • High payload of up to 24 t
  • Maximum load height in low bed
  • Particularly robust in welded steel profile
  • Low tare weight thanks to optimized lightweight construction
  • 2x1 load securing rings and further load securing features as standard

A real powerhouse in timber house construction transport: the low loading platform for the X-SW series.

With a load capacity of up to 24 t, the  X-SWPU340 is one of the strongest swap-body platforms with the most functions in modern construction timber transport. In combination with the X-SW340, the platform offers everything that a heavy load solution has to provide in this so demanding logistics segment: maximum load volume with a platform length of up to 9 m and a particularly low load height of just 1,000 mm (loaded), individual load securing possibilities and a strong and robust platform construction. As standard, all Auwärter swap-body platforms are finished with an EPD coating (sand blasted + cathodic immersion priming + powder coating) – a quality standard that significantly extends the lifetime of your platform.

Technical data

Despite the high load capacity, the X-SWPU340 with its relatively low tare weight of 1,800 kg remains extremely maneuverable and convinces with its stable driving characteristics.

approx. 690 mm

Load height in low bed (loaded)

approx. 1,000 mm

Upper level loading height (loaded)

approx. 1,800 kg

Unladen weight - standard

approx. 2,550 mm

Platform width

approx. 7,000 – 9,000 mm

Platform length

approx. 1,060 mm

Width in low-bed

approx. 24,000 kg

Payload standard


Lifting truck HF Transmob

S stakes

used as a loading aid for securing wall elements when loading and unloading

Cross-member lashing rail

  • to insert the S stakes as a flexible loading aid
  • variable lashing possibilities across the width

X stake (transport stanchions)

  • Hot-dip galvanized rectangular tube stanchion, wedge shaped for optimum load securing of wall elements
  • With eccentric closure and lashing bracket at the top height approx. 2,700 mm
  • can be inserted centrally and on the outside, also fit all other Auwärter trailer models

Low-bed carrier

Side low-bed carrier for transport heights of 3,800 mm.

50 mm webbing

  • with approx. 15 grommets per running meter, 10 meters
  • Securing of the wall elements against falling while loading and unloading the trailer. Attachment of the webbing to the lashing point on the X stanchion using carabiners and to the wall elements using flat head screws


You want more information, a call back or a non-binding offer? Write to us and we will deal with your request.

Overview of all swap-body platforms and load aids

Whether low-bed or flatbed platform, mover or support frame – here you can find the appropriate swap-body platform for every trailer type.

To the swap-body platform product overview