XP130 – 6 m flatbed swap-body platform

Stable telescopic support legs
for individual, flexible parking heights, pull out to the side, lockable, hot-dip galvanized
2x1 load securing rings
in the outer frame provide maximum load safety even with wide transports
X stakes
for optimum load securing of wall elements
Platform design
End to end platform/level load surface and therefore easier loading
Key facts
Convincing advantages.
- large, continuous load area
- proven low construction and thus particularly low load height
- strong lightweight construction in steel profile
- load securing as required with flexibly extendable safety features
- EPD coating (sand blasted + cathodic immersion priming + coating in RAL colors)
- optional curtain frame for dry and secure storage
Robust and loadable without restrictions – the swap-body platform for the WF130L-ZW tandem trailer.
The XP130 swap-body platform 6 m version is the optimum complement for our WF130L-ZW tandem trailer. Its particular advantage is the large continuous load area in the flat bed, which allows simple loading of wall elements at a low loading height of 810 mm. Due to the XXL requirements for the trailer, great emphasis was placed on the strength of the swap-body platform during design. Accordingly, it is one of the medium weight load aids in timber house construction with a respectable payload of 8,9 t. The optional telescopic curtain frame makes it possible to store and transport your load dry and thus allows particularly efficient construction planning – in combination with the WF130L-ZW telescopic chassis, load lengths of 12 m are possible.
Technical data
In combination with the WF130L-ZW, you get a swap-body system with a particularly strong frame construction and a continuous load surface of 6.00 x 2.55 m.
approx. 810 mm
Upper level loading height (loaded)
approx. 950 kg
Unladen weight - standard
approx. 2,550 mm
Platform width
approx. 6,000 mm
Platform length
approx. 8,900 kg
Payload standard
Accessories

Lifting truck HF Transmob
- Internal maneuvering and loading aid with hydraulic lifting system
- Available as a version for 15 t lifting force or as a version for 24 t lifting force.

H-rack support frame
- The secure and modular side rail for protecting slingers at a critical height of over 2 m
- Compatible with virtually all swap-body platforms currently in use
- kNo loss of load space thanks to folding middle side rail
- as 7 m version or 9 m version

L loading platform
- insertable
- Side fixing on the low bed frame

Safety package
- Oversized warning signs front and rear
- Side LED lighting
- LED all round lighting that can be plugged in at the rear
Drawbar clamp
- for V drawbar
- hot-dip galvanized
S stakes
used as a loading aid for securing wall elements when loading and unloading
Cross-member lashing rail
- to insert the S stakes as a flexible loading aid
- variable lashing possibilities across the width
X stake (transport stanchions)
- Hot-dip galvanized rectangular tube stanchion, wedge shaped for optimum load securing of wall elements
- With eccentric closure and lashing bracket at the top height approx. 2,700 mm
- can be inserted centrally and on the outside, also fit all other Auwärter trailer models
Low-bed carrier
Side low-bed carrier for transport heights of 3,800 mm.
Quiry
You want more information, a call back or a non-binding offer? Write to us and we will deal with your request.
Overview of all swap-body platforms and load aids
Whether low-bed or flatbed platform, mover or support frame – here you can find the appropriate swap-body platform for every trailer type.