• 0
  • 0

XPU120EZ low-bed swap-body platform

Auwärter Wechselpritsche XPU120EZ
+

X stakes

for optimum load securing of wall elements

+

2x1 load securing rings

in the outer frame provide maximum load safety even with wide transports

+

Low-bed construction

for maximum load height

+

Stable telescopic support legs

for individual, flexible parking heights, pull out to the side, lockable, hot-dip galvanized

+

Guide rollers

for contactless guiding of the swap-body platform into the chassis

Key facts

Convincing advantages.

  • Large transport heights thanks to well-designed low-bed construction
  • Particularly low unladen weight thanks to strong lightweight design
  • EPD coating (sand blasted + cathodic immersion priming + powder coating)

The light low-bed swap-body platform with the advantage of load volume.

The XPU120EZ swap-body platform is one of the lightest and most maneuverable load aids in European timber house construction transport. Thanks to the strong lightweight construction in steel profile, it is very maneuverable and can be optimally accepted by the chassis of the  EZ120 tandem trailer. The low bed without floor ensures a maximum load height. Thanks to the low bed width of up to approx. 1,370 mm, large volume wall elements or timber frames can also be transported. As standard, all Auwärter swap-body platforms are finished with an EPD coating (sand blasted + cathodic immersion priming + powder coating) – a quality standard that significantly extends the lifetime of your platform.

Technical data

With its low unladen weight of only 950 kg and the comparatively high payload of 8,500 kg, the XPU120EZ fulfills all the requirements of a lightweight platform in construction timber transport.

approx. 440 mm (loaded)

Load height in low bed

approx. 950 kg

Unladen weight - standard

approx. 2,550 mm

Platform width

approx. 6,130 mm

Platform length

approx. 1,370 mm

Width in low-bed

approx. 1,030 mm (loaded)

Upper load height

approx. 7,550 kg

Payload standard

Accessories

Lifting truck HF Transmob

X stake (transport stanchions)

  • Hot-dip galvanized rectangular tube stanchion, wedge shaped for optimum load securing of wall elements
  • With eccentric closure and lashing bracket at the top height approx. 2,700 mm
  • can be inserted centrally and on the outside, also fits all other Auwärter trailer models

Quiry

You want more information, a call back or a non-binding offer? Write to us and we will deal with your request.

Overview of all swap-body platforms and load aids

Whether low-bed or flatbed platform, mover or support frame – here you can find the appropriate swap-body platform for every trailer type.

To the swap-body platform product overview