• 0
  • 0

X-TL240 turntable trailer

Auwärter Drehschemelanhänger X-TL240
+

Telescopic extension

telescopic drawbar extendable up to 3m with automatic guide rollers and pneumatic locking

+

2x1 load securing rings in outer frame

for side lashing even with wide loads

+

X stakes

wedge shaped for optimum load securing

Key facts

Convincing advantages.

  • extremely maneuverable with very good following characteristics
  • Load lengths of up to 13 m
  • Low design and thus more load volume
  • Telescopic extension up to 3 m
  • particularly robust thanks to EPD coating (sand blasted + cathodic immersion priming + powder coating)

The maneuverable powerhouse.

The X-TL is convincing exactly where other timber transport trailers find their limits: in restricted residential and building areas. The modern turntable steering with four different steering points for extreme maneuverability and excellent following characteristics – including in a fully laden state with a maximum payload of 20 t.

Developed for the core demands in timber construction, the turntable trailer fits flexibly into your transport requirements and can be appropriately extended in a modular fashion.

Gallery

Technical data

With 13 m transport length, the X-TL is one of the largest but yet most maneuverable truck trailers in timber construction.

approx. 2,550 mm

Platform width

approx. 7,000 – 10,000 mm

Platform length

Dual 215 / 75 R 17.5

Tires

approx. 850 mm (loaded)

Load height

approx. 20,000 kg

Payload standard

24,000 kg

Gross weight

Accessories

Telescopic extension

  • Chassis frame with 3m extendable drawbar
  • Integrated automatic cable roller
  • Pneumatic locking

Autom. electro-hydraulic steering system

  • Steering axle and hydraulic Steering cylinder
  • Slewing ring with pulsed angle sensor
  • Remote control for manual control

Cross member lashing rail

for inserting the S stakes as an optimum loading aid, giving variable lashing possibilities across the width

Twin axle air suspension unit

for raising and lowering and thus for simple acceptance of the swap-body platform

Container locking

for securing when attaching the swap-body platform

S stakes

used as a loading aid for securing wall elements when loading and unloading

X stake (transport stanchion)

  • Hot-dip galvanized rectangular tube stanchion, wedge shaped for optimum load securing of wall elements
  • With eccentric closure and lashing bracket at the top
  • Height approx. 2,700 mm, insertable centrally and on the outside
  • also fits all other Auwärter trailer models

Drive-on floor

  • Heavy duty load-securing rings for lashing vehicles with rubber tires such as lifting platforms and telescopic forklifts
  • Parking supports at back left and right

Safety package

  • Oversized warning signs front and rear
  • Side LED lighting
  • LED all round lighting that can be plugged in at the rear

50 mm webbing

  • with approx. 15 grommets per running meter, 10 meters
  • Securing of the wall elements against falling while loading and unloading the trailer. Attachment of the webbing to the lashing point on the X stanchion using carabiners and to the wall elements using flat head screws

 

GigaBox - the new dimension in closed transport

The matching and sustainable fixed tarpaulin system for the X-TL240: closable on all sides, for maximum transport volume under tarpaulin and designed as a single-person system.

go to GigaBox

Quiry

You want more information, a call back or a non-binding offer? Write to us and we will deal with your request.

All Auwärter turntable trailers at once

A wide spectrum of maneuverable and easily positioned turntable trailers with steering front axle.

To the turntable trailer product overview